Overview

The BR-HD50U allows users to transfer both HD and Professional DV recordings to and from non-linear editing (NLE) systems.With switchable HDV™ and DV recording mode functionality along with DVCAM™ playback, this deck is an easy-to-use and cost effective addition to an existing editing system. The BR-HD50U features digital input and output via an IEEE 1394 standard 6-pin connector for lossless dubbing and recording of both HD and SD programming.

The BR-HD50U includes a full size/miniDV compatible mechanism that has the capacity to record up to 276 minutes of video in either standard or high definition with extremely flexible playback options.The unit supports signals that are recorded in 720 24p, 25p, 30p and 480/60p HDV™, and 480/60i and 24p DV.A front panel 8-digit LED provides display of time code, user bits and VTR status.  With its built-in HDV™ decoder, it has the ability to convert 720p MPEG2 recordings to 1080/60i or 480/60i for monitoring purposes.The BR-HD50U provides an HDMI output for direct digital connection to the latest display monitors.

The new BR-HD50U includes versatile input and output connections including analog component (BNC), Y/C and Composite (BNC) as well as RS-422 control.

Features

Professional Design

HDV recording

As the HDV format uses the same recording track pitch as Professional DV, the BR-HD50 can record signals in either standard or high definition depending on the user's needs.

Multi-format output/Cross-converter function

A sophisticated cross-converter function enables output not only of 720p signals, but also 1080i, 480/576p and 480/576i signals. Plus, thanks to switchable HDV and DV recording mode functionality along with DVCAM playback, you'll have no problems adding this recorder/player to your existing editing system.

HDV international compatibility

Switch between HDV 60 Hz or 50 Hz base as required, allowing recording and playback of 720/25p and 576/50p in addition to 720/24p/30p and 480/60p. This makes it easy to work with internationally sourced material and transfer it to a non-linear system for editing and then archiving to tape. You can also record to Standard DV or Mini DV tape in either HDV 60 Hz or 50 Hz base format.
*Cannot be used as an HDV 60 Hz/50 Hz converter. The BR-HD50U can record and play back signals in both HDV 60 Hz and 50 Hz formats.

Recording system

The BR-HD50U can record HDV format 720/30p/25p/24p, 480/60p or 576/50p video and DV format 480/60i and 480/24p video.

Standard DV/Mini DV compatible mechanism

Proven on Professional DV VCRs, this mechanism provides not only improved running stability, but also accommodates both Standard DV and Mini DV format cassettes without any adapter.

DVCAM™ playback capability (SD)

DVCAM™ recordings can be played back directly on the BR-HD50. This makes it easy to use DVCAM™ recordings as source material for editing.

 

Stable high picture quality

Auto error correction system

JVC has developed an auto error correction system that operates on a frame-by-frame basis to ensure accurate error compensation during playback. After optimally calibrating the playback RF waveform with a pre-filter circuit, the VCO (voltage control oscillator) control voltage is changed so that the data reading clock phase is shifted to the position where the error rate is lowest. The result is accurate, consistent suppression of block noise and reliable, professional-standard performance at all times.

Sweeper heads

During recording and playback, to reduce the block noise which is caused by dust adhering to the heads, our HDV/DV camcorder and recorders incorporate an advanced drum assembly with specially designed "sweeper" heads. These dummy heads sweep off any magnetic material dropped by the tape or any dust that may have entered from outside the unit.

 

Versatile interfaces

HDMI OUT

The BR-HD50 is equipped with an all-in-one HDMI output for direct digital connection to the latest high-definition projector and LCD displays.

RS-422A interface

For compatibility with the widest range of editing systems, the BR-HD50 is equipped with an industry-standard RS-422A interface, allowing easy integration with high-grade NLE systems.

IEEE 1394 interface

For lossless dubbing and recording of both HD and SD programs, compressed HD (MPEG-2) or SD (DV) digital signals can be input or output to or from external devices such as a non-linear editing system. A front panel switch allows you to switch easily between SD and HD.

Versatile analog connections

In addition to IEEE 1394 input/output, the BR-HD50 is equipped with analog component (BNC) output connectors for HD and SD. Y/C input/output connectors (SD mode) and composite input/output (BNC) connectors (SD mode) are also available.

 

User Friendly Design

Large full counter

A big 8-digit LED display on the front panel displays time code, user bits and VTR status.

Audio indicator

This indicator lights whenever audio signals are input. Also, it provides a convenient way to check for the presence of audio signals during tape playback.

High-speed time code search/blank search

The built-in time code generator provides preset, rec run and regen time codes. The DV 20x search function (100x max. in the FF or REW mode) and the HD 8.5x forward search function (6.5x in reverse), provides super-fast access to any desired point on the tape.

Continuous recording

When a camcorder is connected to the BR-HD50 via the IEEE 1394 connector, the BR-HD50 will start recording 5 minutes before the tape in the camcorder ends. This enables continuous shooting for extended periods with no breaks in the recording.

On-screen menu

Systematic, easy-to-understand menu screens simplify setting and operation procedures. Menu setting can be done using either the buttons on the front panel.

Other features

• Lock audio (16-bit, 48 kHz only)
• Time code reader/generator
• Headphone connector
• Contact closure recording
• Repeat playback
• Wired remote control

top

Specifications

top